E-Z Weld Solvent

ez-weld-logoE-Z Weld makes a broad range of high-strength PVC, CPVC, and ABS solvent cements, primers, cleaners, and thread sealants ideally formulated for a variety of pipe joining applications.

All products are manufactured under tight quality control methods and meet or exceeds industry standards where applicable. The maximum shelf life on unopened E-Z Weld® solvent cements is 3 years for PVC, primers & cleaners, and 2 years for CPVC products.

Available in regular, medium and heavy bodied formulas, our expansive line of medium and fast-set cements accommodate all schedules and sizes, exceeds ASTM standards and comply with all necessary IAPMO (UPC) industry listings. If your application need is turf management or irrigation, plumbing, industrial, pool and spa or “Do It Yourself”, E-Z Weld® has a range of products to serve that need. That’s why E-Z Weld® boasts as “Americas Most Complete Line of Solvent Cements.”

202 E-Z 1 PVC Cement

Description

E-Z Weld’s E-Z 1 is a regular bodied, fast – set PVC Solvent Cement. This cement is recommended for irrigation application for both the irrigation professional and the do-it-yourselfers. It is formulated to give maximum performance at an economical cost. It is also recommended for use on thin walled small diameter pipe. When used correctly, this product will make consistently leak proof joint.

Application

This cement is good for joining Schedule 40 PVC pipes and fittings. It is approved for cold water pressure applications up to 2” diameter interference fit. It may also be used for non-pressure applications such as drain, waste, vent, sewer, conduit, gas etc. for up to 4” diameter interference fit.  For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (No. 211). Never add thinner or additive. Never use cement if it is stringy, lumpy or jelly like.

Always follow instructions on the label.

Application temperature:                         32 degree F to 110 degree F.

Storage temperature:                              45 degree F to 110 degree F.

The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55 degrees F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs. 

Temperature Range (F)Pipe size ½” to 1 ¼”Pipe size 1 ½” to 3”Pipe size 3” to 6”
Up to 180 psi181 psi to 370 psiUp to 180 psi181 psi to 315 psiUp to 180 psi181 psi to 315 psi
60 to 1001 Hr6 Hrs2 Hrs12 Hrs6 Hrs24 Hrs
40 to 602 Hrs12 Hrs4 Hrs24 Hrs12 Hrs48 Hrs
10 to 408 Hrs12 Hrs16 Hrs96 Hrs48 Hrs8 days

Physical Properties

  • Color: Clear
  • Body: Regular
  • Set: Fast
  • Shelf Life:3 Years-unopened can

Certification

  • upc-logo

This product is listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard D 2564.

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  A sample of every batch is taken and kept at least one year. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D 2564)

Lap Shear:
250 psi after 2 hours cure time
500 psi after 16 hours cure time
900 psi after 72 hours cure time

Hydrostatic Burst:
400 psi after 2 hours cure time

203 Pool Pro Combo PVC Cement

Description

E-Z Weld Pool Pro Combo is a medium bodied, fast set, light blue, PVC Cement. This cement is specially formulated for applications where working conditions may not be dry. Making a joint while water is present is very risky. Care must be taken and water from the joining surface should be removed. If moisture is still present on the joining surface, work quickly and a longer cure time should be allowed. Light blue color will fade in direct sunlight, thus leaving joint looking clean.

Application

This cement is good for joining Schedule 40 & 80 PVC pipes and fittings up to 8” diameter interference fit. It is approved for cold water pressure applications. It may be used for non-pressure applications such as drain, waste, vent sewer, gas, conduit etc. up to 10” diameter interference fit. For a superior joint use with E-Z Weld Primer, Purple (No.212) Clear (No. 211) Never add thinner or additive. Never use if the cement is stringy, lumpy or jelly like.

Always follow instructions on the label.

Application temperature:                         32 degree F to 110 degree F.

Storage temperature:                              45 degree F to 110 degree F.

The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55 degrees F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs. 

Temperature Range – Degree FPipe size ½” to 1 ¼”Pipe size 1 ½” to 3”Pipe size 3” to 6”
Up to 180 psi181 psi to 370 psi
Up to 180 psi
181 psi to 315 psi
Up to 180 psi
181 psi to 315 psi
60 to 1001 Hr6 Hrs2 Hrs12 Hrs6 Hrs24 Hrs
40 to 602 hrs12 Hrs4 Hrs24 Hrs12 Hrs48 Hrs
10 to 408 Hrs12 Hrs16 Hrs96 Hrs48 Hrs8 days

Physical Properties

  • Color: Light Blue
  • Body: Medium
  • Set: Very Fast
  • Shelf Life:3 Years-unopened can

Certification

  • upc-logo

This product is listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard D 2564.

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  A sample of every batch is taken and kept at least one year. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D 2564)

Lap Shear:
250 psi after 2 hours cure time
500 psi after 16 hours cure time
900 psi after 72 hours cure time

Hydrostatic Burst:
400 psi after 2 hours cure time

207 CPVC Cement

Description

E-Z Weld CPVC Orange is regular bodied, fast-set CPVC Solvent Cement. It is formulated for use on CPVC pipe & fittings, including copper tube sizes up to 3” diameter interference fit.

Application

This cement is good for joining CPVC pipes and fittings up to 3” diameter interference fit for pressure applications. This cement is approved for hot (up to 180 degree Fahrenheit) and cold water pressure systems. It may be used for non-pressure applications such as drain, waste, vent sewer gas, conduit etc.  For superior joint use with E-Z Weld Primer, Purple (No. 212) Clear (No. 211). Never add thinner or additive. Never use the cement if it is stringy, lumpy or jelly like.

Always follow instructions on the label.

Application temperature:                         32 degree F to 110 degree F.

Storage temperature:                              45 degree F to 110 degree F.

Physical Properties

  • Color: Orange
  • Body: Regular
  • Set: Fast
  • Shelf Life:3 years (unopened can)

Certification

  • upc-logo

This product is listed by the International Association of Plumbing & Mechanical Officials (IAPMO). It carries the Uniform Plumbing Code (UPC) seal. This cement meets ASTM Standard F 493.

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  A sample of every batch is taken and kept at least one year. All ingredients are purchased from approved suppliers. This cement has passed the following test (performed in accordance with ASTM Std. D 2564)

Hydrostatic Burst:

  • 400 psi after 2 hour cure time at 73 degree F
  • 200 psi after 2 hour cure time at 180 degree F

 

208 Multi Purpose Cement

Description

E-Z Weld Multipurpose is medium bodied, fast – set solvent cement. This cement was formulated for the joining of PVC, CPVC and ABS (or any combination) pipes and fittings. This product is ideal when the kind of pipes and fittings in the application is unknown.

Application

This cement is good for joining PVC, CPVC & ABS (or any combination) pipes and fittings up to 6” diameter interference fit. This cement may be used on hot (up to 180 degree Fahrenheit) & cold water pressure systems. It may also be used for non-pressure applications such as drain, waste, vent, sewer, gas, conduit etc. up to 8 ‘ diameter interference fit. For superior joint use with E-Z Weld Primer, Purple (No.212) or Clear (211). Do not add thinner or additive. Do not use the cement if it is stringy or jelly like.

Always follow instructions on the label.

Application temperature:                         32 degree F to 110 degree F.

Storage temperature:                              45 degree F to 110 degree F.

CURE TIME GUIDE:
The ASTM has developed the following schedule and may be used as a guide (for relative humidity 60% or less. Sch. 40 size pipe.) eg. a 2” pipe size joint made at 55 degrees F, 50% Relative Humidity and a test pressure of 100 psi would require a cure time of 4 hrs. 

Temperature Range – Degree FPipe size ½” to 1 ¼”Pipe size 1 ½” to 3”Pipe size 3” to 6”
Up to 180 psi181 psi to 370 psi
Up to 180 psi
181 psi to 315 psi
Up to 180 psi
181 psi to 315 psi
60 to 1001 Hr6 Hrs2 Hrs12 Hrs6 Hrs24 Hrs
40 to 602 hrs12 Hrs4 Hrs24 Hrs12 Hrs48 Hrs
10 to 408 Hrs12 Hrs16 Hrs96 Hrs48 Hrs8 days

Physical Properties

  • Color: Amber
  • Body: medium
  • Set: Fast
  • Shelf Life:3 Years-unopened can

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  A sample of every batch is taken and kept at least one year. All ingredients are purchased from approved suppliers.

 

213 Purple Primer/Cleaner

Description

213

E-Z Weld Primer / Cleaner is a blend of solvents formulated to soften and swell and clean PVC and CPVC Pipes and Fittings. Primer penetrates the surface of the pipe and the fitting to be joined therefore; the use of primer will provide a stronger joint. It is highly recommended that primer should be used on the installation of larger than 3” diameter.

Application

E-Z Weld Primer/Cleaner may be used on all PVC and CPVC pipes and fittings, all sizes and all schedules. Apply liberal coat to the outer surface of the pipe end and the inner surface of the fitting socket using a dauber supplied with the can or other suitable applicator. Do not puddle primer into the socket. Unlike pipe cleaner do not wipe off primer. Apply cement according to the instructions on the label of cement while primer is still wet.

Always follow instructions on the label.

Application temperature:             -10F to 110F

Storage temperature:                   -10F to 110F

PURPLE PRIMER WILL STAIN MOST MATERIAL AND CAN NOT BE REMOVED. HANDLE WITH CARE

Physical Properties

  • Color: Purple
  • Body:
  • Set:
  • Shelf Life:Unlimited(unopened can)

Certification

IAMPO (UPC) do not have a standard to certify a Primer/Cleaner. If local code requires the use of Primer this product or any other Primer/Cleaner should not be used.

Quality Assurance

Every batch of cement is carefully checked and monitored to assure consistently high quality standards. Records of every batch are kept.  A sample of every batch is taken and kept at least one year. All ingredients are purchased from approved suppliers.

 

214 Pipe Cleaner

Description

E-Z Weld Pipe Cleaner is a special blend of solvents formulated to clean PVC, CPVC, ABS and Styrene Pipes & Fittings, all schedules and all diameters, prior to applying cement.  This Pipe Cleaner will effectively remove oils, dirt, grease and other foreign matter. It is very important that the surface of pipes and fittings is clean for a strong leak proof joint.

Application

E-Z Weld Pipe Cleaner can be used on PVC, CPVC, ABS and Styrene.  Use applicator supplied with can or clean cloth to apply it, wipe off with clean dry cloth.

Always follow instructions on the label.

Application temperature                        -10F to 110F

Storage temperature:                            -10F to 110F

Physical Properties

  • Color: Clear
  • Body:
  • Set:
  • Shelf Life: Unlimited (unopened can)

Quality Assurance

Every batch is carefully checked and monitored to assure consistently high quality standards. All ingredients are purchased from approved suppliers.

See our EZ Weld Product Demonstration

EZ WELD Repair Patch- Now available